Gateway LTE TRB145 (Cat 1), 3G, 2G, USB, RS485

TRB145

TRB145 gateway

The TRB145 is a very small, lightweight, industrial LTE Cat 1 network interface with RS485 interface.

Thanks to its compact structure and easy installation, this device is perfect for solutions where one device needs to be remotely controlled via the RS485 interface.

Like other TRB products, TRB145 is intended for industrial use. It has many security features: SMS management, firewall, Open VPN, IPsec, Teltonika Networks remote management system (RMS) and FOTA support.

• Authentication: Pre-shared key, digital certificates, X.509 certificates
• Firewall: Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
• Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

• Monitoring and management: WEB UI, CLI, SSH, SMS, TR-069, SNMP, JSON-RPC, MQTT, RMS, Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
• Cloud solutions: RMS, FOTA, Telenor, Azure IoT Hub, Cloud of Things, Cumulocity, ThingWorx
• Modbus: TCP slave, TCP master, RTU master, RTU gateway, Modbus over MQTT
• Serial: Console, Over IP, Modem, NTRIP, Modbus

4 pin connector, 9-30 VDC

RutOS

• Operating temperature: -40° C to 75° C
• Operating humidity: 10-90% non-condensing

• TRB145
• EU power supply
• LTE antenna (magnetic mounting, SMA male, 3 m cable)
• Micro-USB cable (0.8 m)
• Assembly key
• RS485 connector
• Quick start guide

75 x 25 x 65 mm

• Network support: 4G/LTE (Cat 1), 3G, 2G
• CPU: Qualcomm, ARM Cortex A7, 1.2 GHz
• Memory: 512 MB Flash (70 MB free), 128 MB RAM (50 MB free)
• Status LED: 3x network type, 5x signal strength, 1x power
• Housing: Aluminum with the option of mounting on a DIN rail
• Degree of protection: IP30
• Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSLv3, TLS 1.3, ARP, PPP, DHCP, Telnet