Charging Hub HUE-S2BP 4x USB 3.2 Gen 1, 1.2m Cable, MicroUSB Charging, Incl. AC Adapter

The four port AXAGON HUE-S2BP USB 3.0 hub with a 1.2 m long USB cable, power adapter and fast charging support on all ports.

A lightweight small hub with elegant, matte plastic body connects quickly and easily up to four USB devices to your PC at one time.

The permanently attached 1.2 m long USB cable is suitable for use with a desktop computer.

Included in the package is a power supply/charger with USB type-A 5V/2A output and 1.5 m micro USB cable. The advantage of this solution is the possibility to use the supplied charger and cable universally, for example to charge the mobile phone or tablet directly.

Mobile phones, tablets, power banks and other devices can be charged up to 2A (depends on the charger used) in any hub port thanks to the USB Battery Charging 1.2 support.

It can even handle permanent connection of several external disks without external hub power. When power adapter is connected, you can even work with three external disks at one time.

The USB ports located across the hub body with sufficient spacing ensure seamless direct connection of large USB devices.

It can also work as a separate charging hub and charge the USB devices from the power adapter even when the PC is turned off or disconnected.

Features:
4 downstream USB 3.0 ports with enough space around the connectors.
an upstream USB 3.0 port with USB 3.0 Type A male connector on a 120 cm long permanently attached cable.
Compatible with USB 3.0 and backward compatible with USB 2.0 and USB 1.1.
Supports transmission rates 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed).
Supports USB Battery Charging v 1.2 specification.
Included in the package is power supply with USB type-A 5V/2A output and 1.5 m micro USB charging & data cable.
Each hub port can be used to charge up to 2A (with an external USB charger connected).
The iPad charging support up to 2A (with an external USB charger) or up to 1A (without external power supply).
Possibility to connect your device while running thanks to the Hot Plug support.
Full Plug and Play support.
LED indication of hub connection to power supply.
Current overload detection and protection.
Hub dimensions 96 x 32 x 22 mm, USB charger dimensions 22 x 36 x 76 mm including the fork.
Hub weight 76 g (incl. cable), USB charger weight 36 g ((without USB cable).

The hub power mode via USB cable (bus power):
The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5″ external disk) to all four ports.
In this power mode, the USB hub is also able to cope with up to two magnetic 2.5″ external disks simultaneously.
Charging of mobile devices (including iPads) is also possible in this power mode, however, the charging current is only 0.9 A, in some cases 1A (depending on the computer).

The hub power mode via the included USB charger (self power):
In this power mode, the USB hub is able to cope with three magnetic 2.5″ external disks. However, we recommend that you connect max. two external 2.5″ disks simultaneously for reliable long-term hub operation.
Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current 2A of the external power adapter.

Independent charging hub mode without being connected to the PC (charging hub):
After disconnecting the connected PC or without being connected to the PC the hub works with power supply via USB charger as a separate charging USB hub.
Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current 2A of the external power adapter.

OS support:
MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 and later (supported are all 32 and 64-bit Windows OS versions), Mac OS X 10.4x and higher, Linux with kernel 2.6.x and above.
Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.

Package contains:
USB 3.0 hub with a permanently connected 120 cm long cable,
universal power adapter / charger with USB 5V/2A output,
universal charging and data cable USB type A male / micro USB male, 150 cm long,
printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
packed in a cardboard box.

• Hub dimensions 96 x 32 x 22 mm
• USB charger dimensions 22 x 36 x 76 mm including plugs

• USB 3.0 hub with 120 cm fixed cable
• Universal charging/charging adapter with 5V/2A USB output
• Universal charging and data cable USB type A male / micro USB male length 150 cm
• Printed manual
• Packed in a cardboard box

• 4 downstream USB 3.0 ports with enough space around the connectors.
• upstream USB 3.0 port with USB 3.0 type-A male connector on permanently attached 120 cm long cable.
• Compatible with USB 3.0, backwards compatible with USB 2.0 and USB 1.1.
• Support 1.5 / 12 / 480 / 5000 Mbit/s (low / full / high / super speed).
• USB Battery Charging support in specification 1.2.
• Charging source with USB type-A 5V/2A output and micro USB charging & data cable 1.5 m included in the package.
• Each port of the hub can be used to charge up to 2 A (with an external USB charger connected).
• Supports iPad charging up to 2A (with external USB charger), up to 1A (without external charging).
• Possibility to connect the device on the run thanks to Hot Plug support.
• Total Plug and Play support.
• LED indicating that the hub is connected to power.
• Overcurrent detection and protection.