Computer case Volcano Panorama Midi white

Volcano Panorama NF Midi white

Ability to mount motherboards with reversed connectors. Glass, dual-chamber construction. Modern design.

• You receive a case without factory-installed fans, so you can configure the cooling according to your own preferences. Fan controller as standard.
• Design that allows for mounting a motherboard with reversed connectors.
• Tempered glass on the side panel and on the front of the case. The special design allows for the best possible exposure of components.
• Practical accessories included. There is a screwdriver, cleaning cloth and a box for screws.
• Good ventilation and air circulation.
• The side panels are mounted with latches.
• Large possibilities of interior arrangement.
• The use of high-quality materials during production ensures its durability.
• Possibility of mounting a processor cooler with a maximum height of 175 mm.
• Functional interior for 3.5″ HDD and 2.5″ SSD hard drives.
• Space for graphics cards up to 400 mm.
• Dust protection filters.

ENCLOSED IN GLASS

The Volcano Panorama model fits into the latest trends of displaying installed components. One panel with tempered glass is not enough – here we have prepared the possibility of full exposure of the computer. Expensive graphics card, RAM modules, processor cooling – it is a shame to hide all of this in a closed case. If you are assembling a computer with carefully selected components, we know how important it is for you to be able to expose them to the light of day. We have prepared several versions of the model, including with as many as seven factory-installed fans, five, or three, giving a wide range of configuration options. And by choosing the Volcano Panorama you get, above all, the possibility of mounting motherboards with reversed connectors, plenty of space for components – long graphics cards and high processor cooling, a USB-C connector and two USB 3.0 and a two-chamber construction, where the vertically mounted power supply is separated from the mounting part. Everything is enclosed in two glass panels for the best possible effect.

GLASS PANELS

The side and front panels are made of tempered glass for the best possible exposure of installed components. Volcano Panorama is a case for all those who want to enjoy the installed components every day. Because if you value the latest technological solutions and have spent a lot of money on a motherboard, processor and graphics card, there is nothing wrong with looking at your components every day.

TWO-CHAMBER DESIGN

Volcano Panorama is a two-chamber design that separates the service part with the vertically mounted power supply from the actual part of the computer where the motherboard with components is mounted. Thanks to this solution, the most important components for gamers are even better exposed.

MODERN MOTHERBOARDS

Volcano Panorama is a case adapted to mount standard motherboards as well as boards with reversed connectors. Specially prepared holes on the motherboard mounting wall provide even greater possibilities for configuring the computer. All this so that you can use all the solutions available on the market. Even if they are to be future-proof in terms of expansion.

DON'T GIVE UP ON COOLING

It is often the case that when choosing a case you have to compromise either it will be pretty or it will be airy. In Volcano Panorama we do not plan on compromises. That is why good ventilation also goes hand in hand with modern design. Airy top panel, ventilated part on the panel from the service side and from the bottom, with the right fan layout allows the entire computer to work cool, even during intense and long hours of gaming.

CHOOSE YOUR VERSION

The Volcano Panorama case is available in several versions: Volcano Panorama NF Midi (no fans) Volcano Panorama Apex ARGB 3F Midi (three factory-installed fans, two of which with reversed blades) Volcano Panorama Apex ARGB 5F Midi (five factory-installed fans, four of which with reversed blades) Volcano Panorama Apex ARGB 7F Midi (seven factory-installed fans, four of which with reversed blades).

GAMING PANORAMA

This is a case for lovers of admiring the inside of the computer – the glass front and side allow you to look at the graphics card and other components from the best possible side.

CONTROLLER

The case is equipped with an ARGB fan controller mounted in the service part of the case. A total of 9 fans can be connected.

I/O PANEL

The panel with USB / Audio inputs is located in the lower part of the case. Since the case will stand on a desk in most cases due to its design, access to the I/O panel is within reach. On the panel you will find 2 USB 3.0 connectors and one USB-C connector. The microphone and headphone input is located in a combo socket. There is also a button to change the LED backlight of the fans.

FREEDOM IN ATX SIZE

The Volcano Panorama is an ATX standard case, which allows for the installation of modern and advanced motherboards. The ATX board format means full functionality, plenty of space for M.2 drives and an optimally planned arrangement of radiators and space for CPU cooling (especially when it is air cooling). Of course, you can also install ITX and M-ATX motherboards here.

READY FOR WATER COOLING

The case is adapted for water cooling. Radiators up to 360 mm can be mounted on the top and bottom of the case. This is the right amount of space for mounting most of the most effective coolers available on the market. Volcano Panorama is ready for very advanced configurations for gamers.

WITHOUT SCREW

Both side panels are mounted with latches – you don't need any tools to remove the panel and conveniently install components. Do you want to add RAM modules? Blow dust out the interior? With a smooth movement of your hand, you can remove the panels without having to unscrew them. This is one of the most convenient and pleasant solutions implemented in a computer case.

433 x 295 x 388 mm

• Screwdriver
• Cloth
• Screw box

• Possibility of mounting motherboards with reversed connectors
• Tool-free assembly / disassembly of side panels
• Dust filters: bottom, top, side of the case
• Steel thickness: 0.6 – 0.8 mm