Hub HUE-P1A 4x USB3.2 Gen 1 ROUND, micro USB power IN, 30cm USB-A cable

Round shaped USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-P1A fast and easy connects up to four USB devices to laptop or computer.

Three USB ports are located around the perimeter and allow seamless connection of any USB device incl. bulky flash drives or USB readers. The fourth, upper USB port, is ideal for connecting a wireless adapter for better signal reception or for easy insertion of a flash drive with one hand. The rubber pad prevents slipping up on the table. Permanently attached 30 cm long USB cable is ideal for mobile device users.

The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks can be connected to a computer, laptop, tablet or smartphone. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc.

The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet.

Input:  
1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector.    
Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
Connecting USB type A male connector on a fixed 30 cm long cable.

Output:
4x SuperSpeed USB port, USB-A female connectors.
Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).
The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s).

Features:
Possibility to connect your device while running thanks to the Hot Plug support.
Full Plug and Play support.
Sleep mode support.
The high quality shielded cable ensures high communication speed and minimal undesirable interference.
Blue LED indicates the connection to the computer's USB port.
Dimensions 60 x 18 mm.
Weight 43 g (incl. cable).
USB cable length 30 cm.

The hub power mode via USB cable (bus power):
The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5″ external disk) to all four ports.
In this power mode, the USB hub is also able to work with up to two magnetic 2.5″ external disks simultaneously.
Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.5A at 5V (depending on the capabilities of the computer's USB port).

The hub power mode via USB + external USB charger (self power):
Integrated micro USB connector for additional powering the hub.
Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A).
In this power mode, the USB hub is able to work with three magnetic 2.5″ external disks. Recommended for connection to smartphones and tablets.
Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 4.5A at 5V (depending on the capabilities of the external wall charger).

Supported OS:
MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019 / 2022 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions.
Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.

Package contains:
SuperSpeed USB hub with fixed 30 cm long USB cable,
multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
packed in a cardboard box with a hanging hole.

diameter 60x18mm

• SuperSpeed USB hub with 30cm fixed USB cable
• Multilingual manual
• Packed in a cardboard box with a hole for hanging

Entry:

• 1x USB 3.2 Gen1 / SuperSpeed USB port, USB-A male connector.
• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
• USB connection port with type A male connector placed on a 30 cm long cable.

Exit:

• 4x SuperSpeed USB port, USB-A female csatlakozó.
• Support 5.000 / 480 / 12 / 1.5 Mbps (SuperSpeed / High / Full / Low speed).
• The overall permeability / transmission speed of the housing is given by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit / s).

Hub power mode via USB cable (bus power):

• USB bus power is sufficient to connect a low-power USB device (mouse, keyboard, card reader, flash drive, etc.) or a self-powered device (printer, scanner, 3.5″ external drive) to all four ports.
• In this power mode, the USB hub can also work simultaneously with up to two 2.5″ magnetic external drives.
• Charging mobile devices (including iPad) with a current of up to 1.5A in each of the hub's ports. Charging (divided into all ports) reaches up to 2.5A at 5V (depending on the capabilities of the computer's USB port).

Hub power mode via USB + external USB charger (self power):

• Integrated micro USB connector for additional power to the hub.
• For additional power supply to the hub, you can use any wall charger for mobile devices (not included) with a micro USB connector (recommended charger output current min. 2A).
• In this power mode, the USB hub can operate up to 3 magnetic 2.5 external drives. This mode is recommended for connecting to smartphones and tablets.
• Charging mobile devices (including iPad) with a current of up to 1.5A in each of the hub's ports. The total charging current (which is divided into ports) reaches up to 4.5A at 5V (depending on the capabilities of the external wall charger).