Router LTE RUT956 (Cat 4), 2G, GNSS, WiFi

RUT956

RUT956 router

RUT956 is an industrial router that combines dual-SIM 4G LTE cellular, Wi-Fi and wired connectivity options, in addition to GNSS capabilities. Automatic WAN failover ensures the solution continues to operate even if the main connection is lost. Serial communication interfaces enable the integration of the most diverse devices, even older ones. Digital and analog I/O with advanced RutOS software features facilitate equipment control, automation and event notification.

The router is equipped with advanced industrial software features, including Modbus, SNMP, TR-069, NTRIP, MQTT and many VPNs.

• Authentication: Pre-shared key, digital certificates, X.509 certificates
• Firewall: Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
• Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (
• SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
• VLAN: Port and tag based VLAN separation
• Mobile quota control: Set up custom data limits for both SIM cards
• WEB filter: Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
• Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
• Secure Boot: Cryptographic integrity check of the each system boot process (available on device with special order code RUT955T073B0).
• WiFi security: WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation

• Cellular functions: Band lock, SIM switch, Operator black/white list, Data/SMS limits
• Network: Failover (Network backup), VLAN, QoS, Load Balancin
• Monitoring and management: WEB UI, CLI, SSH, CALL, SMS, TR-069, SNMP, JSON-RPC, MQTT, MODBUS, RMS
• Cloud solutions: RMS, FOTA, Telenor, Azure IoT Hub, Cloud of Things, Cumulocity, ThingWorx
• NTP: NTP Server, NTP Client, Sync with: External NTP server, GNSS, Mobile operator
• GNSS: NMEA forwarding, AVL, Geofencing
• Modbus: TCP slave, TCP master, RTU master, RTU gateway, Modbus over MQTT
• Serial: Console, Over IP, Modem, NTRIP, Modbus

4pin connector, 9-30 VDC

RutOS (OpenWrt based Linux OS)

• Operating temperature: -40°C to 75°C
• Operating humidity: 10% to 90% non-condensing

• RUT956 router
• 9W power supply
• 2 x LTE antenna (magnetic mount, SMA male, 3 m cable)
• 2 x WiFi antenna (magnetic mount, RP-SMA male, 1.5 m cable)
• GNSS antenna (adhesive, SMA male, 3 m cable)
• RS485 block connector
• I/O block connector
• Ethernet cable (1.5 m)
• SIM Adapter kit
• RMS leaflet
• Quick Start Guide

110 x 50 x 100 mm

• Network support: 4G/LTE (Cat 4), 3G, 2G
• CPU: Mediatek MIPS 24Kc 580MHz
• Memory: 16 MB Flash, 128 MB RAM
• LED: 2-color network type indication, 5x signal strength, 4x Ethernet, power supply
• 10 pin connector: 1 x isolated input, 1 x digital input (dry), 1 x analog input, 1 x isolated open collector output (requires external voltage), 1 x relay output