Case Raptor X1

SAVIO Raptor X1 ARGB PC Case Mesh / Glass

• Airy MESH front with a filter
• Hinged tempered glass side door
• Addressable ARGB lighting system with four ARGB 120 mm fans 3 pieces on the front and 1 on the back
• ARGB fan control system by remote control / restart button / motherboard and by voice control
• Splitter for 6 fans and ARGB strips
• Two-chamber design with power supply place
• A set of dust filters
• Wide compatibility with AIO water cooling systems

A real predator

Only the fittest can cope with big challenges. Savio Raptor is undoubtedly an accessory that will give you a big advantage during the game. Change the face of the game with this beast.

Dimension

The dimensions of the 407 x 215 x 455 mm SAVIO Raptor X1 housing already take into account the mesh front and side panels made of tempered glass. The method of mounting the side panel, which includes the hinges and works like a glass door, is noteworthy, thanks to which we obtain a beautiful interior display with unprecedented comfort of its use.

Such dimensions allow for the installation of an integrated liquid cooling system with dimensions of 120/140/240 / 360mm on the front, as well as optional 120 or 240mm cooling on the top of the case.

The case can accommodate a processor cooler with a height not exceeding 160mm. Such dimensions allow for vertical mounting of the graphics card GPU.

Unbridled power

The case, resembling a metal grille, hides a real predator inside. The processor and other key components of your set will be protected by it in every possible way. The hard and resistant to mechanical damage surface will guarantee the continuity of work, and the cooling system, using four powerful pre-installed fans high efficiency.

SAVIO Raptor X1 has been equipped with 4 pieces of addressable 6-pin ARGB fans with a size of 120mm and speed of 1200RPM, which are perfectly visible through two glass panels. Three fans are located right behind the glass front panel, and one at the back of the case. The fans communicate using an advanced ARGB LED backlight controller.

Optionally, the casing allows us to install up to 8 120mm fans.

I/O

The I / O panel in SAVIO Raptor X1 is equipped with standard Power ON and Reset buttons, as well as 1 USB 3.0 port and 2 USB 2.0 ports, HD Audio outputs and inputs, and an additional RESET / LED button for managing lighting effects.

War paints

In nature, the most dangerous species use one of two strategies. They stand out with bright colors to shock and depress the opponent, or they blend in with the background thanks to camouflage, which gives them a surprise effect. Savio Raptor is the true king of the hunt because it can change its colors at any time. Fixed backlight colors as well as animated transition scenes are available. They can be freely changed using a button, remote control or sound (music or your own voice).

The included ARGB LED controller has several dozen built-in modes, from backlight effects to speed and preset colors. The user can control the modes in several ways: from controlling the traditional remote control and the button on the case, to controlling the software dedicated to the motherboard (MSI Mystic Light RGB or Gigabyte RGB Fusion), as well as the sound the case changes its modes depending on the sound level in the room.

407 x 215 x 455 mm

• Maximum VGA lenght: 340 mm (vertical)
• Maximum CPU cooler height: 160 mm
• Type of supported PSU: All type of standard/half modular and modular PSU
• PCI expension slots: 7
• Dust filter: 1 x top, 1 x bottom(PSU), 1 x front
• Fans control by: Motherboardremote controllerLED buttonVoice control/
• Fans included: 4 x 120 mm ARGB, 6 pin, 1200 RPM (3 x front, 1 x rear) connected to the controller
• Fan support: front: 3 x 120/140 mm lub 2 x 200 mm rear: 1 x 120 mm top: 2 x 120 (140) mm bottom: 2 x 120 mm
• Watercooling support: front: 1 x 120/240/360 mm rear: 1 x 120 mm top: 1 x 120/240 mm
• Chassis material: SPCC 0.6 mm
• Front Panel Material: Big hole mesh